Mimic is proud to announce the new EDIL100 double door security booth or airlock controller by ADDA Systems that is due for release in the near future.
The EDIL100 is a basic 2 Door interlock control module. It will work to Lock or Unlock 2 Doors such that only one door is ever open at a time
“This product is a Boated Din Rail mountable logic controller. Each unit will interlock 2 Doors such than in NORMAL operation both doors will never be open at the same time,” says Don Smith, Mimic’s technical director. “Multiple controllers can be linked so that only one door of many may be opened at a time’ adds Don.
Applications include Simple Security Booths, Factory and Laboratory Airlocks for temperature and Positive Pressure control, plus other similar applications.
Provision make for a Door Closed & Door Lock Engaged signals of switchable polarity and these can be operated in either “AND” mode (both signals required) or in an “OR” mode (only one of either signal is required).
The “AND” mode is for higher security operation where it is important to know the door is closed and locked. Here, a typical use is where using a Magnetic Lock, one input can be used for the internal reed sensor showing the Mag Lock has engaged the armature or locking plate and the other output could be used with a standard Door Contact showing the door is closed (therefore the door is Closed and Locked).
Operation of each door is via a relay contact for which Normally Open or normally Closed Contact can be selected. Furthermore, the open signal can be selected to be either a continuous or impulse signal.
These above facilities should enable most door Locking or Opening methods to be implemented, and the module has enough flexibility to use most locking devices such as Electric Strikes, Electric Locks, Electric Solenoid Dead bolts, Electro Magnet, Magnetic Locks, Magnetic Shear Locks, Electrical Door and Gate Operators plus many others.
As the EDIL100 is manufactured locally by Mimic Components custom orders are available to the end user. Other products for access control systems manufactured by Mimic Components are custom Face-Plates with built in switches, controls, pilot lights and illumination, in addition to the ADDA System Doorman (door monitor with alarm), Nurse-call System and Pedestrian Controls such as Midi-Traffic lights/Robots, LED illuminated Cross Arrow and the Walking/Standing Man indication plates.
